5.0 Dyna-Mod
The 5.0 Dyna-Mod has
more electronic dwell in it over a stock module to provide more coil saturation
time. This extra dwell time allows the coil to produce a more intense spark.
Improves throttle response and low end power. Mounts in the original factory
location without any modifications.
Part #000555 (84-93) $69.95
Part #X000555 (94-95) $69.95
Screamin' Demon Coil
Open up spark plug
gaps to a whopping .060" with the Screamin' Demon coil. No drop off in
power as RPM's increase. The coil has a brass terminal, rather than aluminum,
which provides better conductivity and will resist corrosion longer. This coil
is too "hot" for stock plug wires.
Part #31724 $69.95
5.0 Cap and Rotor
Super conductive
brass terminals deliver ALL of the spark to the plugs. Excellent dielectric
strength resists carbon tracking. Available in red or blue.
Part #34100 $30.00
Livewires
LiveWires come
with space age, heat resistant sleeving to provide protection from exhaust heat.
The sleeving is heat treated glass braid and is non-flammable and non-corrosive
to chemicals. LiveWires are custom fit - no assembly is required. Each wire is
numbered at each end for the correct cylinder. LiveWires have a durable and long
lasting silicone jacket and insulation. Spiral wound core prevents electronic
interference - no radio noise or computer interference. Available in blue,
black, red, yellow & purple.
Part #C9057 (stock, unequal length or long tube headers)
$99.00
Part #C9058 (equal length shorty headers) $99.00
*The 5.0 Firepower Ignition Kit
consist of all four components listed above. They may be purchased separately
for the price listed or order the entire kit and receive a 10% discount!
Part# 5.0KIT (86-93 Mustang 5.0) $268.90 -10% =
$242.01
Part# X5.0KIT (94-95 Mustang 5.0) $268.90 -10% = $242.01
Screamin' Demon Coil Packs
Open up your spark
plug gaps to a whopping.065" when you install our Screamin' Demon Coil
Packs. By producing a fatter spark, fuel is burned more efficiently and power is
gained. No drop off in power as RPM's go up. Your spark plugs stay cleaner
longer. The Screamin' Demon Coil Packs are easy to install, mounting in the
original equipment location. They are completely epoxy filled for improved heat
transfer and vibration resistant. The Screamin' Demons are too "hot"
for stock plug wires.
Part #31725 $99.00 (96-98 Mustang, 94-97 Thunderbird, 97-99
4.6L Trucks)
4.6 Livewires
After bolting on
our Screamin' Demon Coil Packs, you'll need a set of "LiveWires" spark
plug wires to deliver the hotter spark to your plugs. LiveWires are built with a
space age heat resistant sleeving to provide protection from exhaust heat. The
sleeving is heat treated glass braid and is non-flammable and non-corrosive to
chemicals. Approximately 1/2" in diameter, LiveWires perform great and look
awesome! The 4.6 LiveWires are custom fit, so no assembly is required. Each wire
is numbered on each end for the correct cylinder. LiveWires do not produce
electronic interference such as radio noise and computer interference, due to
the spiral wound core. 4.6 LiveWires are available in blue, black, red, purple
and yellow.
Part #C9084 $125.00 (96-98 Mustang, 94-97 Thunderbird, 97-99
4.6L Trucks)
Part #C9085 $159.00 (96-98 Mustang Cobra)
Billet Aluminum Wire Looms
Because the
LiveWires will not fit the stock 4.6 wire separators, you'll need a
professionally built set of looms. The billet aluminum wire looms are polished
and they help avoid crossfire by neatly separating the LiveWires.
Part# 9100 $49.00 (5.0 Ford)
Part# 9200 $75.00 (4.6 Ford)
*The 4.6 Firepower Ignition
Kit consist of all three components listed above. They may be purchased
separately for the price listed or order the entire kit and receive a 10%
discount!
Part# 4.6KIT (96-98 GT, 94-97
Thunderbird, 97-99 4.6 Trucks) $299.00 -10% = $269.10
Part# 4.6COB (96-98 Cobra) $333.00 -10% = $299.70
5.0 Billet Distributor
Performance
Distributors 5.0 Billet Distributor is designed to deliver accurate trigger
signals to the 5.0L engine. The distributor is made from a solid billet of
6061-T6 aluminum. It is then CNC machined for close tolerances and great looks.
Each distributor has a sealed ball bearing at the top of the shaft for strength
and to guide the oversized polished steel shaft through the entire rpm range.
When making serious horsepower with the 5.0L engine, the stock distributor can be the weak link. The 5.0 Billet Distributor from Performance Distributors is the answer for a strong replacement and good looks. The Billet Distributor comes complete with brass terminal cap & rotor, 5.0 Dyna Module and a steel gear for factory roller cams. This is a drop-in OEM replacement distributor for 86-95 Mustangs with factory style connectors so no modifications need to be made to stock wiring.
Part# 18456 (86-93 5.0L) $395.00
Part# 19455 (94-95 5.0L) $395.00
5.0 130 Amp Alternator
Replace the low
amperage alternator on your 5.0 with the 130 amp unit from Performance
Distributors. This is a brand new alternator that includes the regulator,
internal fan, pulley and wiring harness. It mounts in the factory location of
86-93 Mustangs with minor grinding work to the stock bracket. Great for use with
underdrive pulleys!
Part# 5.0130A (All 5.0's) $259.00
Dyna-Batt
Lighten up your
Mustang! Remove the heavy 40 lb battery and replace it with Performance
Distributors 13.5 lb Dyna-Batt. The Dyna Batt produces more power per pound than
any battery on the market. It has the cranking power of wet cell batteries three
times its size! This is due to the extremely low internal resistance which
allows faster, more consistent starting. The Dyna Batt does not have a cold
cranking amp rating like other batteries, but has been tested to crank engines
with compression ratios as high as 15:1. The reserve capacity of the Dyna Batt
is 16 Amp Hours. The Dyna-Batt is completely dry cell and can withstand the
rigors of high performance and racing environments. It is built with corrosion
resistant terminals and is truly maintenance free. The Dyna Batt has an
excellent storage life and recharges very quickly. Any 12 volt charger can be
used to recharge the Dyna Batt but a low amperage battery charger/maintainer,
much like the Surecharge Battery Charger we sell, is recommended. Dimensions of
the Dyna Batt are: Length = 7", Width = 3" & Height = 6 1/2".
This battery works great with our 5.0 130 amp alternator!
Part# 5575B (All 5.0 & 4.6 Mustangs) $155.00