Livewires Now Available for Hondas, PT Cruiser, LS-1 Camaro and Firebird and
96-98 Mustang Cobra! See Chart Below for Price, Part Number and Applications.
Performance Distributors LiveWires are the BEST!
Space
Age, Heat Resistant Sleeving Provides Protection from Exhaust Heat Custom Fit -
No Assembly Required Numbered on Each End for Correct Cylinder Durable Silicone
Jacket and Insulation Spiral Wound Core Prevents Electronic Interference Easy to
Install - No Add-On Sleeves Colors Available in Red, Black, Blue, Yellow &
Purple
LiveWiresŪ from Performance Distributors come with space age, heat resistant sleeving to provide protection from exhaust heat. The sleeving is heat treated glass braid and is non-flammable and non-corrosive to chemicals. LiveWires unique sleeving provides protection from -76° to +1400° F and offers excellent resistance to moisture and chemicals.
LiveWires have a durable and long lasting silicone jacket and insulation. Heat shrink applied between the boot and the sleeving keeps dirt and moisture away from wire terminals. Swivel boots are easy to work with.
LiveWires spiral wound core prevents electronic interference. No radio noise or computer interference and they work with delay boxes and stutter boxes. They offer extremely low resistance of 300 - 350 Ohms per foot for optimum spark travel.
*Performance Distributors LiveWires are designed as a custom fit wire set. In some cases, the lengths may not fit your application exactly due to different engine configurations. We can build a custom set of wires for your application using your specifications. Custom orders are an additional $10.00. Contact us at 281-592-2211 for more information on a special order of LiveWires built to your specs!
NOTE: If you have a breaker point style distributor or aftermarket distributor that utilizes the small diameter cap with female terminals, then add a "P" to the end of the Livewires part number for the correct distributor boots and coil wire.
| Part# | Application | Price | Part# | Application | Price
| C9050
| Chevy V6-262 cid
| $95.00
| C9051
| SB Chevy-Under Headers
| $95.00
| C9052
| SB Chevy-4 around front,4
under headers
| $99.00
| C9053
| SB Chevy-Over Valve Covers
| $95.00
| C9054
| SB Chevy-Around front of
engine
| $105.00
| C9055
| BB Chevy-Under Headers
| $99.00
| C9056
| 289, 302 Ford - Up to '84
| $99.00
| C9057
| Ford 5.0 w/ stock, shorty or
long tube headers
| $99.00
| C9058
| Ford 5.0 w/ equal length
shorty headers
| $99.00
| C9059
| Ford 351W-351C-390-460 Over
Valve Covers
| $95.00
| C9061
| BB Chevy-Stock Exhaust
| $99.00
| C9062
| SB Chevy-Fuel Injection, Under
Headers
| $95.00
| C9063
| SB Chevy-Fuel Inject. OVC
| $95.00
| C9064
| Chrysler 318-340-360
| $95.00
| C9065
| Chrysler 383-400-440
| $109.00
| C9066
| Chevy Inline 6 Cyl, 250-292
| $85.00
| C9067
| Pontiac 350-400-455
| $95.00
| C9068
| Oldsmobile 350-455
| $95.00
| C9069
| Ford Inline 6 Cyl, 240-300
| $85.00
| C9070
| Corvette 85-91
| $99.00
| C9072
| Corvette 92-96 LT-1,LT-4
| $119.00
| C9073
| 93-96 Camaro, Firebird LT-1
| $119.00
| C9074
| Buick 455-Over Valve Covers
| $95.00
| C9074-350
| Buick 350-Over Valve Covers
| $95.00
| C9075
| Cadillac 368-425-472-500
| $95.00
| C9076
| AMC V8, Buick 350
| $95.00
| C9077
| AMC Inline 6 Cyl. 232-258
| $85.00
| C9078
| Chevrolet 96-99 305-350
| $95.00
| C9079
| Toyota Landcruiser Inline 6
Cyl.
| $85.00
| C9080
| 94-96 Honda Accord EX; 93-98
Civic Del Sol-S,SL, 92-95 Civic EX
| $79.00
| C9081
| 90-93 Honda Accord DX,LX;
94-97 Civic Del Sol V-TEC; 92-95 Prelude
| $79.00
| C9082
| 92-95 Honda Civic CX,DX,LX;
88-91 Civic CRX
| $79.00
| C9083
| 2001 and Up PT Cruiser
| $85.00
| C9084
| 96-98 4.6L Mustang; 97-99 4.6L
Ford Trucks
| $125.00
| C9085
| 96-98 Mustang Cobra 4.6L
| $159.00
| C9LS1
| 97-01 Corvette, Camaro Z-28,
Trans Am
| $109.00 |
|
|---|
Billet Livewire Separators
Performance
Distributors Livewires are built with a protective heat sleeve that covers the
entire length of the wire. Trying to fit the Livewires in factory wire
separators is virtually impossible. Nylon zip ties can be used to keep the wires
separated but they do not offer a show quality appearance. This led us to build
a billet wire loom that will not only keep the wires apart, but offer good looks
as well. These billet separators are held together with allen head screws which
are mounted flush within the loom. These separators are designed specifically
for the Livewires and will not pinch or damage the protective heat sleeving.
Please visit our Livewire page for more information on applications to fit your
vehicle..
Part# 9100 (All V8 Applications) $49.00
Part# 9200 (96-98 4.6L Mustang, 97-99 4.6L Ford Trucks) $75.00
LiveLive
Wires for Harley Davidson
| Part# | Application | Price
| C80HD
| 82-94 FXR
| $39.00
| C81HD
| 85 & Later Softail; 80-84
FLH; 91-98 Dyna-Glide
| $39.00
| C82HD
| 85 & Later FLTC; 85-96
Evolution 1340, FLHTC, FLHS, FLHR; | 82-93 FLHS $39.00
| C83HD
| 86 & Later XL's
| $39.00
| C84HD
| Touring Models FLHT, FLHTC,
FLHR
| $39.00
| C85HD
| 98 & Later XL 1200 S
Models
| $95.00
| C86HD
| Twin Cam FLH; 99 & Later
Touring Models, FLHR
| $45.00
| C87HD
| Twin Cam FXD; 99 & Later
Dyna-Glide; FX-D, FX-DEL, | FX-LXR, FX-DWG $45.00 |
|
|---|